MPx Intercooler, 08-09 Caliber SRT-4
Model Number: 223108
Have you increased the boost on your Caliber SRT4? Driving your car hard?
If so, then the compressed air leaving the turbo on your motor is going to be much hotter than the factory intercooler was designed to cool effectively.
This is where a larger core, more efficient intercooler will be able to help produce more power OVER the factory intercooler.
On a car with simple bolt on parts, 14 psi, and 290 horsepower at the wheels, gained 12 horsepower at the wheels, and a much better throttle response. Caliber SRT4's with more power, will of course gain even more power with this intercooler.
In making this intercooler, we start with a 25 inch wide, 3.5 inch deep, and 9 inch tall bar and plate core. We then weld on cast end tanks for maximum strength (no cheesy welded together multi piece end tanks).
For transferring the air from the factory piping, we use custom made silicone hosing thats made with 4 ply silicone reinforced with mesh. This is the strongest possible silicone hosing made, capable of withstanding 80+ Psi, and 450 degrees.
Also included are new clamps.
Lastly, we provide you with a detailed, photo installation instruction set that guides you through installation so that your not left in the dark!
Take a look at the photos above showing the following:
Pictures showing the cast end tanks, and beautiful TIG weldingPhoto showing the MPx intercooler installed on our project Caliber. Notice how the intercooler is placed lower in the bumper,
further away from the engine, and away from the radiator for optimal cooling of the pressurized air.
International customers outside of the United States. Due to the dimensions of this intercooler (46" X 14" X 11"), we are not able to ship it by US Postal Service to select countries. Please contact us by email to discuss shipping this item by Fedex/DHL before ordering.
This intercooler is shown with a hot side aluminum pipe in the photo, but due to the sharp angles and limited room under the hood/around the radiator, we have discontinued the aluminum hot side pipe. We are now including a 4 ply custom made silicone coupler to connect the factory hot side piping to the intercooler. The cold side pipe is still made out of aluminum.
*Backordered: 5/29/2025