713-270-8520

SPC Front Camber Bolt Kit, 95-05 Neon/PT Cruiser/Caliber/Compass

Read or Write Review

Model Number: 601316

Give your vehicle up to an additional 1.75 degrees of negative or positive camber. Simply remove the upper bolt, install the camber bolt holding the strut to the knuckle, loosen the lower bolt, and make adjustments to your desired camber setting.

These bolts are made from a 12.9 grade bolt that is the highest strength available. These also have a special hardcoat finish that are highly rust resistant to ensure they don't seize and disintegrate.

This listing is for two bolts, or enough to do the front two wheels.

These bolts are compatible with the following vehicles:

95-05 Neon
03-05 Neon SRT-4
01-10 PT Cruiser
03-07 PT Cruiser GT
07-12 Caliber
08-09 Caliber SRT-4.
16-22 Compass

Compatible with OEM struts, Tokico struts, XYZ brand struts, and even coilovers. If you require additional camber adjustment, this is what you need.

Video from SPC of alignment bolt installation and discussion:

Torque specs from SPC 97 ft-lb

~~$25.75~~

$19.99

$19.99

SPC Front Camber Bolt Kit, 95-05 Neon/PT Cruiser/Caliber/Compass, Camber Kits & Wheel Spacers: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Noel

Will this come with instructions on how to install them?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  On the box that the camber bolts come in, there is a brief amount of information along with torque ratings.
Steve

Will these work with coilovers? Specifically racelands?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  All of the coilovers we carry have slotted holes for easy camber adjustment. We are not familiar with the Racelands, but if they don't have slotted holes then you can use these for further adjustment.
Kevin

this is a set of 2 bolts for the front and same would go for the rear?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  Yes.
Rod Rodriguez

Will these work on ACR models? Firestone Tire Service/Alignment center said the camber could not be adjusted because I needed a special Mopar Service Kit with undersized bolts for the front and rear.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  These bolts work on EVERY single 95-05 Neon made, including SRT-4's, ACR's. R/T's, Highlines, Sports, Base models, ETC. EVERY trim line, every year.
Anthony

Are these 14mm and how many degrees does this change in the camber

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  These bolts have a 15mm and 18mm head.
  
  Like mentioned in the product description above, these give up to an additional 1.75 degrees of positive or negative camber.