SPC Rear Camber Bolt Kit, 95-05 Neon

Read or Write Review

Model Number: 601317

Give your vehicle up to an additional 1.75 degrees of negative or positive camber. Simply remove the upper bolt, install the camber bolt holding the strut to the knuckle, loosen the lower bolt, and make adjustments to your desired camber setting.

These bolts are made from a 12.9 grade bolt that is the highest strength available. These also have a special hardcoat finish that are highly rust resistant to ensure they don't seize and disintegrate.

This listing is for two bolts, or enough to do the front two wheels.

These bolts are compatible with the following vehicles:

95-99 Neon
00-05 Neon
03-05 Neon SRT-4

Compatible with OEM struts, Tokico struts, XYZ brand struts, and even coilovers. If you require additional camber adjustment, this is what you need.

Video from SPC of alignment bolt installation and discussion:

Torque specs from SPC 65 ft-lb

~~$25.75~~

$19.99

SPC Rear Camber Bolt Kit, 95-05 Neon, Camber Kits & Wheel Spacers: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Chance

For the rear, do i need only one bolt for each side

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Yes, one bolt needed per corner. There are two bolts holding the strut to the knuckle, and you can replace the top bolt with this camber adjustment bolt and adjust.
Oswald

Are these a set of 2 or is it just 1 bolt?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Like it shows in the photo, this is for two bolts, or enough to do both rear struts. One bolt needed per strut, two bolts in the package, or enough to do both rear struts.
skyler

Is this the rear toe adjuster bolt? If not can you point me in the right direction?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  No, this has nothing to do with camber. If you want to adjust toe, you will need to adjust your rear tension struts. These are the arms that go from front to back and attach to the rear hubs. Look under your car in the back and you'll see what we are talking about.
Jeff

Will these work with BC Coilovers?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Yes, like we stated in the product description: "Compatible with OEM struts, Tokico struts, XYZ brand struts, and even coilovers. If you require additional camber adjustment, this is what you need."
  
  Whatever you have, as long as its designed for the Neon or SRT-4 Neon, it will work, yes.
Eugene F Gardner

Are the fronts and rear different?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Yes, front and rear camber bolts are different. The front bolts are longer, and larger in diameter than the rear.