713-270-8520

CBD Carbon Fiber OEM SRT-4 Style Hood, 03-05 Neon SRT-4

Read or Write Review

Model Number: 220731

For a nice clean look the CBD OEM style hood can't be beat! This hood features a slightly wider hood scoop with a pre-installed silver mesh. The underside looks exactly like the stock hood with functional ducting. There are no holes for window sprayers.

Note: These are shipped directly from CBD. The lead time on this item is 3-6 weeks for completion. These items are made to order as they do not keep these in stock.

Our website is not very good at calculating freight costs for big items like this, so if you have a hood and trunk, or hood plus other Fedex shippable items, you may get an error rate, or some outrageous amount. We recommend ordering freight items like this by themselves and then place a separate order for Fedex/USPS shipped items. If you have several freight items, like a hood and trunk you want to buy, we recommend ordering the hood by itself, and then contacting us by phone and adding the trunk, as we can get you a much better rate. Typically we can ship a hood and trunk combo for about $550 but our website may charge a lot more.

$1,099.99

$1,099.99

CBD Carbon Fiber OEM SRT-4 Style Hood, 03-05 Neon SRT-4, Hoods & Trunks: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Jake

how much is shipping to Illinois?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  For most of the USA freight cost is about $130-200, possibly more if it's a residential delivery address. Please contact us to discuss and get a freight quote.
Mike

What does this hood weigh vs stock ? And is the webbing/framing underneath constructed of carbon fiber or is it fiber glass ?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  This hood weighs about 11 lbs versus the factory weighing about 28-32. The underside is fiberglass. CBD does offer a full top and bottom carbon shell but we dont stock it as few people want to spend several hundred dollars more for cf underside when it will rarely ever be seen. If you are interested in the cf top/bottom contact us to discuss.
Taylor

Can the original "2.4L Turbo" Hood Scoop replace the silver mesh?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  The silver mesh on this hood is glued into place. You cannot use the oem plastic hood scoop insert with this hood.
Luis

I bolt this hood direct to the original hinges, make the spray holes and that is no more holes or adaptations.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  Correct, also take into account an hour or so to get it adjusted perfectly and you'll be all set.
Wyatt

Can this hood be painted?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  Yes, call carbon fiber hoods can be painted.
Brise

Can holes be place holes into the hood for window sprayers without damaging the hood?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Yes of course. You'd want to tape off the top of the hood with blue painters tape, mark It carefully where you want the squirters to be, then drill with a low amount of force, and follow up with some small hand files to tape it to the size you need.
Daylen Benavidez

Hood pins required

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  This is meant to use the factory hinges and latches, just like all other hoods we carry. A lot of manufacturers will tell you for liability reasons that you should use hood pins, but that's at your discretion.