713-270-8520

TurboXS Standard Boost Controller

Model Number: 601131

Want more boost out of your turbocharged vehicle? This is what you need. This boost controller has an input and output, you simply remove the line going to your wastegate actuator and put it on the input side, and connect the boost controller and hose to the wastegate where you removed the line from. Then rotate the hand dial until you get to your desired boost level.

The TurboXs boost controllers now have an easier to use boost adjustment that you can turn with your fingers! This way you don't have to keep a allen key handy to adjust the boost level !

Simple, inexpensive, and effective way to control your boost level and generate more power from your engine. Bleed type boost controller allows you to increase boost approximately 12psi over your waste gate boost setting.

This boost controller, like every other boost controller we offer, will work on all turbo vehicles regardless if it has a internal wastegate (Factory style) or external wastegate (bigger turbo style).

$102.00

$102.00

TurboXS Standard Boost Controller, Turbo Upgrades & Accessories: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
Steve

i have a 2005 srt4 with stock turbo looking to turn p boost to 17-18psi can i do that with this boost controller

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  Yes, this will increase the boost, and you can adjust it to your liking. It will not be as accurate as a electronic boost controller, but it will still do a good job.
nick

Can you tell me what the vacume nipple/port size is? I'm about to order this and buy a roll of silicone vacume line but I want to make sure I get the right size. Thanks.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  4mm ID hose works well.
Reese

I have a 2013 Chevy Cruze. It comes stock with a turbo. Can this help me open it up?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  This is a universal boost controller, and therefore, it can be used on all turbo vehicles. We do not have car specific instructions or advice on how much boost you should run. So, if you wanted to turn up the boost we would recommend to slowly turn it up to ensure you dont trigger a check engine light.
Omair

where does this sit exactly for installation? Under the hood or in the cabin?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Although you could use this boost controller in the cabin, we recommend keeping it near the turbo to minimize the amount of lines and length going back and forth. You install boost controllers like this on the line going to the wastegate to increase boost pressure.