AGP Stage 3 Wastegate Actuator (for use w/ Mopar Stage 3 Kit), 03-05 Neon SRT-4

Review star icon Review star icon Review star icon Review star icon Review star icon
Model Number: 220116-STAGE3

This listing is for the AGP Stage 3 Wastegate Actuator for 03-05 Neon SRT-4s equipped with the Mopar Stage 3 Turbo Upgrade Kit!

The Mopar Stage 3 kit has MOPAR lettering on the compressor facing the driver side. If your turbo does not have the MOPAR lettering, then you do not have a Mopar stage 3 kit.

If you want to push a little more out of your Mopar Stage 3 Turbo Upgrade Kit, you may want to consider the AGP Stage 3 WGA. This WGA replaces the Mopar piece, and allows you to hold higher boost pressure to redline. Other benefits include reducing the amount of boost spike, as well as eliminating the oscillation that is common with light spring actuators. This kit includes a custom machined bracket to mount to the factory points on the back of the compressor housing, and is fully adjustable for preload.

It comes with a base 8psi spring installed for those wanting to continue to adjust boost via PCM with a flash from Diablosport or SCT. For those wanting to run off PCM controlled boost, we include a 12psi and a 19psi spring.

Note: The AGP Stage 3 Wastegate Actuator is ONLY compatible with the Mopar Stage 3 Kit. Mopar stage 3 turbo's have HUGE MOPAR lettering on the compressor housing. If you do not see HUGE MOPAR lettering on the driver side of the turbo, do not buy this, and look at the regular AGP wastegate actuator instead.

$184.99
$179.99
$179.99
AGP Stage 3 Wastegate Actuator (for use w/ Mopar Stage 3 Kit), 03-05 Neon SRT-4, Wastegate Actuators: Store Name

Ask a Product Question

  • Matthew
    I have the Mopar Stage 3 kit, along with the AGP Stage 3 actuator, How do I correctly set up the preload on it? (I do have the 19 pound spring installed). Also any tips on "maximizing" the boost settings would be appreciated.
    1 Answer
    • Modern Performance

      You want to adjust the preload by turning the rod until it pulls gently on the wastegate rod. Then, test drive the car and make fine adjustments afterwards to your liking.
  • mike
    if i buy the AGP wastegate for my stage3 mopar whit toys...will i be able to get more boost of my stage3 pmc boost control..
    1 Answer
    • Modern Performance

      Once you install the AGP wastegate for use with the stage 3 Mopar turbo kit, then you are off pcm control and the boost level is determined how you adjust the wastegate.
  • Brandon
    Can this wga be run on PCM controlled boost? I have a tuner and use diablosport.

    Thank You
    1 Answer
    • customer service rep

      This wastegate is designed only for use with the stage 3 turbo kit from Mopar. If you have a stock turbo you should look at the other wastegate from AGP for stock turbos.

      So, out of the box, this wastegate cannot be used with the diablosport, as the diablosport is designed to work with the factory wastegate. If you get a custom tune from a diablosport cmr tuner then you can use this wastegate, otherwise you cant do this yourself though.
  • tyler
    I have a mopar stage 3 turbo and a greddy electronic boost controller, would this WGA be a good fit for me or should I use a stock style WGA?
    1 Answer
    • Customer Service Rep

      The AGP stage 3 wastegate and boost controller serve the same purpose - make the turbo spool faster and hold more boost pressure. So, sure you can use both.
  • Christopher van
    I have stage 3w/toys and a 47lb wheel run off diablo pcm .
    Will this help ? If so what would it help.
    1 Answer
    • Customer Service Rep

      The stage 3 AGP Wastegate actuator has a stronger wastegate spring than the factory stage 3 turbo. So, the AGP wastegate actuator will hold the wastegate flap closed longer, which will make boost build up faster, and hold higher boost pressures than the factory wastegate actuator. Yes it will help all stage 3 kits, regardless of what intake wheel you have to build up and hold more boost.
  • Carlos
    I have a mopar stage 3 kit with toys and can this be used on pcm controlled boost with the dial?
    1 Answer
    • Customer Service Rep

      This wastegate includes three springs. 8 psi spring installed that works perfectly with ECU Controlled boost. Then there are 12 psi and 19 psi springs included in case you want to disable the ECU controlled boost and have the wastegate controll the boost pressure independently.