713-270-8520

MPx Adjustable Cam Gears, 03-05 Neon SRT-4 / 95-99 Neon 2.4L Swap

Read or Write Review

Model Number: 220233-KIT

The MPx Adjustable Cam Gears for the 03-05 Neon SRT-4 / 95-99 Neon 2.4L Swap / 01-10 PT Cruiser were designed and put into production for the following reasons:

Other aftermarket cam gears for the 2.4L engine have had several failures in which the inner spokes of the cam gear have cracked, and the cam gear has failed.
Other aftermarket cam gear manufacturers frequently experience delays, causing their 2.4L cam gears to be out of stock more often than they are in stock.

So, what has MPx done differently? We set out to create 2.4L cam gears that customers wouldn't have to worry about failing, and that were both affordable and readily available! We start with machined aluminum solid centers for superior strength, then use 1/4 grade 8 flanged head bolts, and anodize with a hard coat for superior protection against corrosion and wear.

Unlike most other aftermarket cam gears, the MPx 2.4L Cam Gears will fit under the stock plastic timing covers.

Note: Price listed is for a pair of MPx Adjustable Cam Gears.

$279.99

$279.99

Additional Options

ARP Polished Stainless Bolt Upgrade for MPx Cam Gears

Model Number: 220233-ARP

The bolts used with the MPx cam gears are a very high strength, flange head bolt for strength and reliability. The Read more

Option

Gates Racing Timing Belt, 03-05 Neon SRT-4

Model Number: 220191-RACING

(Note: the timing belt on your 03-05 SRT4 / PT Cruiser Turbo should be replaced every 90-110k so if your overdue for Read more

Mopar OEM Cam Seals 2.0L / 2.4L DOHC

Model Number: 220191-CAMSEALKT

Noticing a small oil leak around the cam gear area? We now carry brand new OEM cam seals to replace your old ones. Read more

MPx Adjustable Cam Gears, 03-05 Neon SRT-4 / 95-99 Neon 2.4L Swap, Heads, Camshafts & Valvetrain: Store Name

Ask a Product Question

- *E-mail: (Required)
  *Name: (Required)
  
  Characters remaining: 500
  Our Q&A program is designed to educate our community.
  This is not to answer questions about your orders, or problems you are having with a part you ordered. If you have questions about a part you have already ordered, please contact us by email at info@modernperformance.com or call us 713-270-8520 for faster service.
jason

Are these sold in a set or individually?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Modern Performance
  
  These are sold as pairs.
Martin

I bought a set of these, im curious with every notch for the -/+ 12. Is every notch just one degree or 2?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  Every notch is one degree, allowing up to -12 or +12 degrees.
Albert GH

Are they available in other color rather than aluminum?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  These are only available in silver, or aluminum color finish.
Mike Huffman

Is it normal for the intake cam to be half a notch off when the timing is at tdc after install and setting tension and seating the belt on these? I have the stage 2 Crower cams installed as well. I have done the timing procedure about 5 times and the cam timing is always off when crank is at tdc. Thanks.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- customer service rep
  
  If your head/block has ever been decked, you'll run into situations like this.
Brandon Lee

What is the torque specs for the adjustment bolts.

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  10ft lbs or 120inch lbs.
Justin B

Will these fit a 2.4 swap with 2.0 cams

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  As long as its a 2.4 head these cam gears will work. It does not matter which cams you are using. This is because of the offset of the cam gear.
Kenneth Schlosser

Just installed your cam gears on my full bolt on srt4 can you recomend how to degree them with stock cams

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  In most cases, we see power gains by advancing the intake cam, and retarding the exhaust cam. HOWEVER, this may not work well for your particular setup/cam choice/tune, etc. To properly set your car up for the power level you want, you need to get your car on a dynamometer and do some dyno tests to see where advancing and retarding your cam gears makes more power at.
Brandon

So I did a 01 2.4 pt bottom end with a 98 neon dohc head with the 2.0 cams. Will they mount correctly for the swap i did?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  The 1995-1999 Dodge Neon 2.0 cylinder head is identical to the 2.4 cylinder head used in many 1995-2000 Chryslers. Therefore, you can use your Neon Dohc head with a 2.4 PT bottom end with no issues, and use the MPx cam gears no problem.
albert

hi there guys, wondering if these are road legal in california?

1 Answer
- E-mail: Name: (optional)
  
  Characters remaining: 500
  Type your response below:
- Customer Service Rep
  
  Probably not. CARB (California Emissions Laws) are very strict and almost nothing except a basic air intake is ruled illegal. Anything that can be seen, and recognized as not factory equipment is likely going to cause issues for you in California.