713-270-8520
View Product Reviews
|
220314-KONIKITSR - Koni Sport Adjustable Strut Cartridge, 03-05 Neon SRT-4 (excluding ACR) |
< Return to product |
|
Product Rating: 
Date Posted: 2024-02-17 11:41:38
|
| These are a great option if you don't want to go with coilovers |
| Posted By: Richard Thibeault |
| Location: Los Angeles, CA United States |
|
Comments: The Koni's were delivered on Friday (that was fast) and I got them installed on Saturday. I must say, they are fantastic! Since I had the correct tools ready to use, installation wasn't difficult (not as easy as a strut assembly swap out, but that's not an option for these cars at this point). I'm very happy with the handling and ride with them. I've got my car back, and then some. |
Product Rating:
Date Posted: 2021-04-19 11:09:38
|
| Great inserts, follow the directions. Well mostly |
| Posted By: Mike Hyde |
| Location: Lakeland, FL United States |
|
Comments: These inserts are the perfect combo for mopar stage one springs. If you want handling without the sacrifice of comfort then these are your inserts. Install is pretty straight forward. The fronts you cut off about 40mm from the top of the oem strut. Don't listen to the forums as they are wrong. The rears are a little different. The insert body is about 12mm longer than the rear strut body. When I measured using the instructions I came out to about 39mm. Took off 39 mm on one strut. But that was to much. It left the 3 notches on the insert outside of the oem body. So I did some more measuring. I deducted 12mm from 39 and cut off 27mm from the second strut. This fit like it should. Could probably go down to even 25mm for a more snug fit. |