713-270-8520
View Product Reviews
|
226156-SCRBP - Deyeme Manual Transmission Shift Linkage Tension Strut Bushing, Dart/Renegade/Cherokee/500L |
< Return to product |
|
Product Rating: 
Date Posted: 2022-08-04 11:02:43
|
| Worked Great |
| Posted By: Tom N |
| Location: Chaska, MN United States |
|
Comments: Simple install and good price; if you need the bushing, get it. |
|
Product Rating:
Date Posted: 2022-04-11 00:09:34
|
| Awesome |
| Posted By: JAMES P OLMSTEAD |
| Location: SYCAMORE, IL United States |
|
Comments: Item was perfect. Package even came with detailed photo instructions. |
|
Product Rating:
Date Posted: 2022-03-13 20:43:48
|
| Small part, big difference. |
| Posted By: Robert Grizzard |
| Location: Bridgeport, TX United States |
|
Comments: Anything polyurethane is going to be a great addition to any setup. I understand that this is just a little part, but given the importance of it, it's a part that should have been polyurethane from the factory. If this is the only part you replace, you're still coming out ahead. |
Product Rating:
Date Posted: 2021-09-07 13:48:48
|
| linkage fix |
| Posted By: john tosi |
| Location: lflowery branch, GA United States |
|
Comments: solved problem |
|
Product Rating:
Date Posted: 2020-03-16 16:17:55
|
| Best shifter linkage |
| Posted By: william peralta |
| Location: Daphne, AL United States |
|
Comments: I've bought other shifter linkage bushings and all of them have broke, this one hasn't giving me a problem and still driving with the best performance. |
|
Product Rating:
Date Posted: 2019-09-12 20:52:23
|
| Good Part But |
| Posted By: Tony |
| Location: Scranton, PA United States |
|
Comments: So far so good. But the instructions are misleading that you can press the bushing in with you hands. I had to remove the whole assembly grease it up well and use a table vice to work it in place. |
|
Product Rating:
Date Posted: 2019-08-19 10:24:30
|
| Force |
| Posted By: Cleve Pile |
| Location: New Castle, DE United States |
|
Comments: Part fit car but needed a bit of force. This was not in the instruction. U need to clamp or squeeze the bushing over the ring. |
|
Product Rating:
Date Posted: 2019-01-09 15:41:40
|
| Linkage Bushing |
| Posted By: Fred Archuleta |
| Location: Killeen, TX United States |
|
Comments: The bushing is a pain to put in while the linkage is installed. Once the linkage was removed the bushing popped in the linkage in a few seconds and once installed on the transmission it eliminated the play from the worn out bushing. I would recommend this to anyone who has the blown out transmission linkage bushing. |
|
Product Rating:
Date Posted: 2018-12-02 10:16:11
|
| Shift bushing |
| Posted By: Jordan |
| Location: Okc, OK United States |
|
Comments: I highly recommend this product. I have had zero issues after installation. I would suggest taking the shift rod out to make it easier to press the bushing in. |