713-270-8520
View Product Reviews
|
243191 - Forge Diverter Valve, 08-10 Cobalt SS / HHR SS / Cadillac / Regal w/ 2.0L Turbo |
< Return to product |
|
Product Rating: 
Date Posted: 2022-07-25 18:30:20
|
| Great Product |
| Posted By: Kane Seidel |
| Location: Reading, PA United States |
|
Comments: Well the only thing I can say to sum it up is if you have the K04 turbo and the factory vacuum actuator for the blow off valve is lagging the Forge Valve will definitely bring back the boost!! |
|
Product Rating:
Date Posted: 2021-08-09 21:57:32
|
| High quality |
| Posted By: Ryan |
| Location: Hamlake, MN United States |
|
Comments: Ive recently ordered a diverter valve from forge. Through modern and the shipping was qwik. Easy install. |
|
Product Rating:
Date Posted: 2021-05-15 22:57:42
|
| Forge BPV for LNF |
| Posted By: Andy Boyles |
| Location: Boise, ID United States |
|
Comments: Easy bolt on replacement to fix the stock one with a torn gasket. Works perfectly and looks like a much higher quality part then the original. |
Product Rating:
Date Posted: 2021-02-16 10:58:44
|
| Good performance over stock |
| Posted By: Josh P. |
| Location: Akron, OH United States |
|
Comments: It functions as intended and doesn't appear to be leaking or causing issues being tuned at 26 psi. The spring had to be swapped out, but other than that it was a direct swap. Product came packaged well and undoubtedly fast. I ordered on a Monday and got it Wednesday morning. Only issue I had was the large o-ring did not want to stay in place at first and the small o-ring wouldn't stay at all. Only other issue was lack of new bolts. I don't know if they're supposed to have them, but it would have been useful since the ones from stock seemed to push the fitment around just a bit. Product gets a 4 star because it functions as it should, but overpriced for a bypass valve. 5 star to MAP for excellent shipping |
|
Product Rating:
Date Posted: 2019-11-01 11:50:42
|
| Perfect fix for the stock replacement |
| Posted By: Robert Clark |
| Location: Reston, VA United States |
|
Comments: Great for the stock turbo with a tune holds boost great and its tunable |
|
Product Rating:
Date Posted: 2019-08-27 10:41:56
|
| Phenomenal Product |
| Posted By: Robert B |
| Location: Orem, UT United States |
|
Comments: I've been driving my Buick GS everyday since I ordered it new. I also have an 07 Solstice GXP with some mods so I am familiar and love the Ecotech 2.0 platform. My GS has over 155k miles and needed a bit of help in the boost area. I researched and found the LHU engine might have a diverter valve issue. I looked around for options besides just replacing with a stock part. I found the FORGE Diverter to be what i was looking for. Ordering was easy, simple and accurate. Instructions came that were perfectly clear. My installation took me 30 minutes and I didn't rush. I love the design that allows easy changing of the spring weight without disassembling the whole valve. Performance after has been significantly improved with crisp changes in the opening and closing of the valve. Thanks for a product that just simply fills a great need and works better than advertised. |
|
Product Rating:
Date Posted: 2019-06-18 12:14:59
|
| Forge BPV |
| Posted By: Keith |
| Location: Sullivan , MO United States |
|
Comments: Replaced my worn out stock unit. Easy to install. Came with piston greased already and works like a charm. Small difference in sound but already had the K&N SRI with blowoff sound. |
|
Product Rating:
Date Posted: 2019-05-08 10:24:37
|
| Quality Part |
| Posted By: Braydon |
| Location: Duvall, WA United States |
|
Comments: Works great,fits perfectly. Install is quick 1 vacuum line and 3 10mm bolts. The vacuum line on the valve is adjustable so you can change the angle. *** MAKE SURE TO CLOCK THE ROTATION OF THE VALVE CORRECTLY *** you want the vent of the valve to point down toward the open area. It's very obvious but just pay attention to where it goes. |
|
Product Rating:
Date Posted: 2018-12-03 10:14:22
|
| Forge BPV |
| Posted By: christian |
| Location: Plano, TX United States |
|
Comments: Great product, easy install. Does not make a very noticable difference on sound but definately an upgrade from stock. |
|
Product Rating:
Date Posted: 2018-09-25 10:49:26
|
| Turbo forged valve |
| Posted By: Tom |
| Location: BROCKTON, MA United States |
|
Comments: Forge Diverter Valve, 08-10 / HHR SS was what I needed to keep turbo from falling on its face. |